Solar Light

Light is one of the most important factors for plant growth and development. Of course, natural light is available to everyone and you do not need to spend money on it, but, alas, it is not always enough. If the plants do not have enough light (this phenomenon is especially often observed in winter), then you have to resort to additional sources of lighting. Special electrical sources are designed so that the emitted waves stimulate growth and create favorable conditions for photosynthesis. Artificial light for efficient plant growth must emit a spectrum of electromagnetic cure similar to that obtained by plants in their natural environment. If a complete analogy is difficult to achieve, then lighting should satisfy at least the minimum needs. To ensure the most comfortable conditions for development, special lamps are selected that have different effects. The specific choice should depend on what type of plant is grown and at what stage of development it is. When using artificial light sources, it is very important that they provide exactly the assimilation lighting requir Solar Light ed. If lamps are ineffective for this purpose, then for the most part they will only produce heat. Today, several schemes for the use of artificial lighting can be used: It should be noted that the complete replacement of daylight is used exclusively in climate-controlled rooms. Only when the balance is maintained can the optimal growth and development of plants be ensured. When deciding to use phytolight for growing certain plants at home, you must follow the following recommendations: The most important question is which phyto-luminaires are the best to choose? Today there are many varieties of devices for creating artificial light, but not all of them are suitable for growing plants. Consider the most common types of lamps that allow for the active development of flora at home. Thanks to modern developments, led light sources have become affordable and capable of serving their owner for a long time. The choice of many falls on this type of lamps due to a number of their advantages: It is not difficult to make such a lamp with your own hands, but it is still impossible to purchase a powerful device, since there are difficulties in mass production. The structure of such a light bulb is very convenient - it has a built-in choke, which means that all that is needed is simply to screw it into the socket. Distinguish ECL by the type of glow: It is the latter type that is recommended to be used as an independent source of artificial light for plants. The huge advantages of such lamps are low energy consumption and a very long service life (on average, up to 15 thousand hours). Such advantages also have a material expression - one lamp will serve for a very long time, which significantly reduces the cost of purchasing new lamps. The main advantages of this type of lamps are that they do not heat up, which means they have no effect on the air temperature, which is very important when growing plants. When choosing, you need to give preference to those types of fluorescent lamps in which blue rays are present - they are necessary for the effective flow of photosynthesis. Standard fluora units produce twice the light energy per unit of electrical power compared to conventional incandescent bulbs. They can work continuously up to 20 thousand hours. It is also worth noting the long service life and economy in terms of electricity consumption. Cheaper cold light bulbs are less efficient for growing plants. In order to grow plants in an aquarium, special lamps for artificial lighting are also needed. There are two main types of such devices. https://jiji.com.gh/awoshie/stage-lighting-and-effects/solar-light-cDelO3lFyX341uum5Imi9XB0.html